|
CATALOG
|
|
|
|
|
|
MINI CART
|
|
|
|
|
|
CONTACT INFO
|
|
|
Mailing Address:
PO Box 530-B
Kennebunkport, ME
04046-1821
Phone:
1-207-967-9110
or (toll free):
1-800-777-6471
Fax:
1-207-967-9117
or (toll free):
1-800-89LOINK
(895-6465)
E-mail:
rwatson@loink.com
Visit Our Links
|
|
|
|
|
|
|
|
Gas Powered Hammer Drills
NEW PRICING
These two NEW hammer drills use two cycle engines, which are small and light weight, very portable, but very powerful. Item # LO246N is 34lbs with a 51.7cc engine, while the LO118N is 13 lbs with a 22.6cc engine. They can be used to drill granite, rock, frozen ground, concrete, and many other materials and can chip concrete, and brake asphalt. The LO246N can also drive rebar, the LO118N can not. They both have a three position leveler, so you can turn to, DRILL, for drilling wood, brick and other softer materials, DRILL/HAMMER, for concrete, stone, and granite, HAMMER ONLY, to chip, brake asphalt or drive rebar. The LO246N uses SDS MAX bits from 1/2" to 2" in diameter, while the LO118N uses regular SDS bits from 1/4" to 1 1/8 in diameter. The chisel bit in LO246N, in the hammer/chipper mode, can be positioned in 12 different angles. This allows the operator to keep the drill handle in a more comfortable position while chipping. It also has much more power for chipping and driving rebar than the LO118N. The LO246N can use a SDS MAX to SDS Adapter, so you if you have SDS bits already, this adapter will fit those bits saving you from buying SDS MAX bits. The LO118N comes with a metal case while the LO246N comes with a plastic case. They are made in China to the specifications of the importer and carry a 60 day warranty. The bits below are Measured in Over All Length, take approx. 6'' off to find the drilling depth.They also have TUNGSTEN CARBIDE TIPS for better drilling performance.
Specifications:
Item No.LO118N
Drive Motor Two-stroke gas engine (1E31F)
Displacement 22.6
Engine Max Power 0.6 Kw (0.8 hp)
Engine Max Speed 6500 rpm
Fuel Mixture 30:1 (gas to oil)
Percussion Rate 4400 per min
Rotary Hammer Speed 800 rpm
Tank Capacity 0.6 liters
Max Drill Diameter 30 mm (1.18 inches)
Lubricant Requirement FC/2T Lubricant Oil
Weight 5.8 kg (12.8 lbs.)
Item No. LO246N
Drive Motor Two-stroke gas engine (1E44FE)
Displacement 51.7 ml
Engine Max Power 1.3 Kw (1.74 hp)
Engine Max Speed 6500 rpm
Fuel Mixture 30:1 (gas to oil
Percussion Rate 2400 per min
Rotary Hammer Speed 300 rpm
Tank Capacity 0.9 liters
Max Drill Diameter 52 mm (2.04 inches)
Lubricant Requirement FC/2T Lubricant Oil
Weight 15.2 kg (33.5 lbs.)
NEW 6 MONTH OPTIONAL WARRANTY
This new 6 month warranty covers part and labor on either drill purchased from date of purchase. Dose not include misuse, inbound or outbound freight.
|
|
|
|
|
|
